| Max Product Volume |
(L) |
2 |
| Dry cycle |
(pc/h) |
900×2 |
| Screw Diameter |
(mm) |
60 |
| Screw L/D ratio |
(L/D) |
22~30 |
| Screw drive power |
(KW) |
15~18.5 |
| Screw heating capacity |
(KW) |
5.04~6.7 |
| No.of heating zone |
(ZONE) |
3~4 |
| Output of HDPE |
(kg/h) |
65~80 |
| Output of PVC |
(kg/h) |
70~85 |
| Oil pump drive power |
(KW) |
5.5 |
| Clamping force |
(KN) |
37 |
| Platen distance |
(mm) |
138~368 |
| Max.Size of Mold |
(W×H)(mm) |
300×320 |
| Capacity |
(L) |
|
| Max.Die diameter |
(mm) |
90 |
| Die heat capacity |
(KW) |
1.8 |
| No.of heating zone |
(ZONE) |
3 |
| Central distance of bi-die |
(mm) |
130 |
| Max.Die diameter(Bi-head) |
(mm) |
55 |
| No.of heating zone |
(ZONE) |
3 |
| Heating capacity |
(KW) |
2.3 |
| Blowing pressure |
(Mpa) |
0.6 |
| Air volume |
(M3/MIN) |
0.4 |
| Cooling water pressure |
(Mpa) |
0.2~0.3 |
| Water consumption |
(L/MIN) |
50 |
| Size of machine |
(L×W×H)(m) |
2.7×1.89×2.5 |
| Weight of machine |
(TON) |
4.2 |
|
|
|
1\Electrical control system:The machine works under the PLC control(made by the Mitsubishi Co. of Japan) via a man-and-machine interface(displayed in Chinese version or in English version).The machine is equipped with a modularized temperature controller and operated through a touch-type coloure screen.All the production data can be set up,modified,searched and monitored and the machine trouble diagnosis can be completed both on the touch-type screen.The electric elements work on the non-contact working principle,thus being durable in service life.
2\Hydraulic system:The machine works under the proportional pressure control. The machine is equipped with hydraulic valves and hydraulic pumps imported from world-famous companies,thus assuring consistent and reliable working performance.
3\Plasticizing system:The high performance screw used on the machine assures thorough and homogeneous plasticization and mixing of plastics.
4\Speed regulation system:Frequency-converter-controlled speed regulator + speed change gearbox with hardened alloy steel gears.Speed regulation can be completed smoothly with less noise generated.Therefore the machine is durable in service life.
5\Mould opening,closing & moving system:A big 3-point central beam mechanism for opening & closing the mould halves and locking the mould assures balanced distribution of locking force and is free of any deformation after long-time operation.The mould is horizontally moved on linear spherical ball guideways at high traveling accuracy and rapid speed and with less resistance.
6\Air-bolowing needle bracket:The air-blowing needle bracket is of solid L-square design.The sturdy bracket assures smoothness of the product cut.
|
|
|
|
|
| Select Image |
 |
|
|
|
|
