ZQ-B2/ZQ-C3 Full automatic blow molding machine is suitable for making PET
plastic containers ,It can blow all kinds of bottles in shapes: carbonated bottle, mineral water bottle, pesticide bottle, cosmetics bottle, and other packing containers. it has saved the cost to the maximum extent; it has lower rejection rate, higher capacity, and more stable performance than the semi-automatic one, and moreover, run smoothly and easy for operating.
*Stable performance with advanced PLC.
*Infrared oven adopts the quartz lamp to heat the PET tube.
*No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
*Low cost, high efficiency, easy operation, easy maintenance, with automatic technological process. Strong clamping force with high pressure and double crank links to lock the mold.
Main Parameter:
| Model |
ITEM |
ZQ-B2 |
ZQ-C3 |
| Productivity |
Depend on bottle design |
800-1000PCS/H |
1800-2500PCS/H |
| Product type |
Volume |
5L |
0.1-2L |
| Body diameter |
≤175mm |
≤100mm |
| Height |
≤330mm |
≤310mm |
| Neck diameter |
40mm-45mm |
28mm-30mm |
| Mould |
Cavity |
2 |
3 |
| Mold thickness |
260mm |
240mm |
| Mold size |
480*260*360mm |
430*240*360mm |
| Main machine power |
Electrical source power |
380V/220V 50/60HZ 3Phase |
380V/220V 50/60HZ 3Phase |
| Power |
33kw |
25kw |
| Really use power |
13kw |
9.5kw |
| Air system |
HP air compressor |
2.0m3/min 3.0Mpa |
2.0m3/min 3.0Mpa |
| LP air compressor |
1.3m3/min 1.0Mpa |
/ |
| Air Tank |
0.6m3 3.0Mpa |
/ |
| Air dryer |
2.0m3/min 3.0Mpa |
2.0m3/min 3.0Mpa |
| Cooling water |
Water Chiller |
3HP |
3HP |
| Machine |
Size(L*W*H) |
2500*1500*1800mm |
2000*1300*1800mm |
| Weight |
2200kg |
1800kg |
| Preform unscrambler |
Size(L*W*H) |
2000*950*2480mm |
2000*950*2480mm |
| Weight |
250kg |
250kg |
